DHR10 (YAMAHA) Powered Loudspeaker

รหัสสินค้า : YAMAHA-DHR10

ราคา

25,000.00 บาท

จำนวนที่จะซื้อ
ราคารวม 25,000.00 บาท

สินค้าไม่เพียงพอ

สินค้าหมด

DHR10 (YAMAHA) Powered Loudspeaker

The DHR10 is a 2-way bi-amp powered loudspeaker, equipped with a 10-inch woofer and a 1.4-inch HF driver, and perfect for use in fixed installations. Combining a 700W amplifier module and high-performance DSP with the same high-grade plywood construction found on Yamaha’s high-end DZR Series, the DHR10 offers best-in-class sound quality and durability.

 
General specifications
Speaker type 2-way, Bi-amped Powered Speaker, Bass-reflex
Frequency range (-10dB) 52 Hz - 20 kHz
Coverage area H90゚ x V60゚ (Rotatable)
Crossover 1.9 kHz: FIR-X tuning™ (linear phase FIR filter)
Maximum Output Level (Measured peak, IEC noise@1m) 128 dB SPL
ComponentsLF Diameter: 10" cone, Voice Coil: 2", Magnet: Ferrite
HF Diaphragm: 1.4", Type: 1" throat compression driver, Magnet: Ferrite
Amplifier class Class-D
Power ratingDynamic 700 W (LF: 500 W, HF: 200 W) *1
Continuous 325 W (LF: 260 W, HF: 65 W)
Cooling Fan cooling, 4 speeds
Power consumption 60 W (1/8power), 18 W (Idle)
Power requirements 100 V, 100-120 V, 220-240 V, 110/127/220 V (Brazil), 50/60 Hz
A/D D/A Converters 24 bit 48 kHz Sampling
Processors HPF: OFF, 100 Hz, 120 Hz, 24 dB/Oct.; D-CONTOUR: FOH/MAIN, MONITOR, OFF
I/O connectors INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
Cabinet material Plywood
Finish Durable Polyurea Painting, Black
Handle Top x1
Pole socket Φ35 mm x1 (Bottom)
Rigging Top x 2, Rear x 1 (Fit for M10 x 30 - 50 mm Eyebolts)
Floor Monitor Angle -
DimensionsW 305 mm (12.0")
H 494 mm (19.5") (with rubber feet)
D 300 mm (11.8")
Net weight 15.0 kg (33.1 lbs)
Options U-bracket: UB-DXRDHR10
Visitors: 590,666