10,900.00 āļāļēāļ
JBL V6 (JBL) 500W, Two-Channel Professional Audio Amplifier
āļĢāļŦāļąāļŠāļŠāļīāļāļāđāļē : JBL-V6
| āļĢāļēāļāļē |
33,900.00 āļāļēāļ |
| āļāļģāļāļ§āļāļāļĩāđāļāļ°āļāļ·āđāļ | |
| āļĢāļēāļāļēāļĢāļ§āļĄ | 33,900.00 āļāļēāļ |
āļŠāļīāļāļāđāļēāđāļĄāđāđāļāļĩāļĒāļāļāļ
āļŠāļīāļāļāđāļēāļŦāļĄāļ
ïŧŋJBL V6 V-Series JBL 500W, Two-Channel Professional Audio Amplifier
JBL V6 is a cost-effective two-channel professional audio amplifier, which is specially designed to meet low and medium power output demand and provides performance matching for JBL entertainment speakers.
JBL V6 features two-channel audio amplification and built-into 2U rack-mounted amplifier housing. With Harman customized amplification transistor, it redefines innovative circuit design according to JBL's acoustic requirements to deliver high-fidelity acoustic sound for JBL entertainment loudspeakers. Balanced XLR input and throughput are provided. Signals can be sent to another device through the balanced connector. SpeakonÂŪ audio connection and output binding post design facilitate quick and easy KTV applications.
- 2U rack-mounted amplifier housing fits into standard professional audio equipment cabinet
- Intuitive front panel at-a-glance, simplistic and functional design
- Support stereo, parallel and bridge-mono modes
- Provide three power output options: 2 x 640W @ 4ohms, 2 x 500W @ 8ohms, and 1280W @ 8ohms (bridge mode)
- Equipped with Harman advanced amplification transistor and specially tuned for JBL entertainment loudspeakers ensuring delivering high-fidelity acoustic sound
- Amplifier is specially tuned with JBL Entertainment speaker, enabling easier and faster setup and installation
- SpeakonÂŪ audio connection and output binding post design facilitate quick and easy application
- Equipped with a variable-speed fan and detachable dust filter for easy maintenance
IMAGES
āļ āļēāļāļŠāļīāļāļāđāļē
SPECIFICATION
āļāļļāļāļŠāļĄāļāļąāļāļīāļāļēāļāđāļāļāļāļīāļ
| 4 ohms stereo (per channel) | 640 W |
| 8 ohms stereo (per channel) | 500 W |
| 8 ohms bridge mono | 1280 W |
| Frequency Response (1W) | 20 Hz â 20 kHz, +0/-1 dB |
| Frequency Response (1W) notes | Measured in a full space (4Ï) condition. |
| THD | < 0.5%, 20 Hz â 20 kHz |
| Transient Intermodulation Distortion (IMD) | < 0.6 % (60 Hz and 7 kHz at 4:1, from full rated output to -30 dB) |
| Conversation Rate | > 10 V/Ξs |
| Damping Coefficient | > 200 (8 ohms, 10 Hz to 400 Hz) |
| Signal-to-Noise Ratio | > 100 dB |
| Signal-to-Noise Ratio notes | Referenced to rated output power, 20 Hz to 20 kHz, A-weighted |
| Voltage Gain | 36 dB |
| Crosstalk | -75 dB @ 1 kHz, -59 dB @20 kHz |
| Crosstalk notes | Referenced to rated output power |
| Input Sensitivity (Rated power @ 8 ohms) | 0.775 V |
| Input Sensitivity notes | According to IEC standard, tested for 2 hours under pink noises with a crest factor of 6 dB. |
| Input Impedance (Rated) |
20k ohms (balanced inputs) 10k ohms (non-balanced inputs) |
| Signal Input/ Output Connector | One balanced XLR input and one XLR LINK output per channel |
| Amplifier Output Connector | One Speakon signal output interface and one set of terminal output interface per channel |
| Front Panel Control | Power switch and channel gain knob |
| Rear Panel Control | Output mode switch: Stereo, Parallel, Bridge-mono |
| Power Indicator | Blue |
| Signal Indicator | Green |
| Clipping Indicator | Yellow |
| Fault Indicator | Red |
| Powerr Cord Specifications |
Plug : 10 A, 250 V Cable : CCC 3 x 1.0 mm 2 x 1.5 m |
| Amplifier Housing | Built-in 2U standard rack |
| Protection | Protection against short circuit, no load, power on/off noise, radio interference and abnormal temperature |
| Ventilation | Air convection mechanism from front to back |
| Heat dissipation and cooling | DC motor fan for heat dissipation and cooling |
| Dimension (W x H x D) | 482 mm x 88 mm x 238.5 mm |
| Weight | 11 kg |
