VA-6200MA (ITC) Voice Alarm Controller, Built-in 500W. & 8 Zone

รหัสสินค้า : ITC-VA-6200MA

ราคา

62,000.00 บาท

จำนวนที่จะซื้อ
ราคารวม 62,000.00 บาท

สินค้าไม่เพียงพอ

สินค้าหมด

Descriptions:


Intelligent Public Address and Voice Alarm system is the organic combination of computer network technology, communication technology, information technology and so on. It is a combination of related voice alarm system. Through the PC management software, you can do system function customization and control, automatic completion of the system physical zone status monitoring and management, automatic completion of the terminal equipment monitoring and management. It is mainly used in intelligent residential quarters, shopping malls, shopping centers, and buildings such as voice alarm and background music.


Features:


* Built-in 500W amplifier, integrated 8 zones A + B independent dual speaker loop partition output, the partition has a separate LED indicator, a separate output control button and volume adjustment.

* Audio processing with 6 general audio inputs, it can connect with an external user microphone, CD player, radio and other audio signals, and can be achieved in any partition to play any audio source.

* The local emergency PTT microphone input (remote microphone, emergency voice), allowing users to freely change the audio output priority according to the actual situation, to configure audio input priority through the system control software.

* With an external backup power amplifier input, when the built-in amplifier is failed, it can automatically switch to the backup amplifier.

* Support automatically monitoring the working condition of the each zone speaker loop (open circuit, short circuit).

* 8-channel trigger input and output interface, it can trigger the pre-programmed language information to the specified partition or (trigger) corresponding to the external power supply to achieve the corresponding event warning.

* It is integrated independent EVAC voice information player.

* Remote MIC online interface, it can be connected to a remote microphone. The paging station connection using standard RJ-45 network port and CAT-5 network cable, paging transmission can be used to transmit long-distance transmission;

* With controller connection interface, it can be connected to the expansion machine. The connection uses the standard RJ-45 network port and CAT-5 cable transmission

* With a TCP / IP communication interface to support the basic Window platform visual interface operation, the state automatically synchronized.

* Support 24V DC power supply.

* With the monitor function of power amplifier.

* Built-in recording function, no need external equipment.

* With system failure, emergency dry contact output, emergency reset dry contact input.

* The partition output with three-wired, four-wired relay function.

* With one IP address reset port.

Model

VA-6200MA

Power output

500W

Output voltage

100V

MIC1-2 input distortion

<1% (rated output power), 1KHz

MIC1-2 input frequency response

80Hz~20KHz

MIC1-2 input sensitivity

5mV/600Ω

MIC1-2 input SNR

>65dB

AUX3-6 input distortion

<1% (rated output power), 1KHz

AUX3-6 input frequency response

80Hz~20KHz

AUX3-6 input sensitivity

350mV/10kΩ

AUX3-6 Input SNR

>70dB

Emergency microphone

Emergency microphone

Sensitivity

10mV

Impedance

600Ω

Standby amplifier input

100V

Standby amplifier audio output

±385mV (balanced output)

Alarm input

8 channel

Alarm Output

8 channel

Partition output

8 channel

24V relay output

8 channel

Short circuit mode

No voltage, short connection

Level mode

Require external 10K and 4.7K resistors

Cooling method

Air-cooled

Protection mode

Delay / over temperature / short circuit / overload

Output volume adjustment

6

Built-in MP3 capacity

16G

Format

MP3

Slave Controller Communication

RS485 bus

Slave Controller

Support 19 slave controllers

Remote MIC communication

CAN bus

Remote MIC

Supports 32 remote MIC

Supply voltage

~ 220V-240V, 50/60Hz

Maximum current

3A

Fuse specifications

250V / 5A, slow type

Standby voltage

24V DC, ±20%

Maximum current

30A

Maximum power consumption

600W

Dimension (L x W x D)

484 x 88 x 353mm

Weight

About 10.8kg

Installation method

Desktop or 19" cabinet

 

Visitors: 591,883