DCi2/600N (CROWN) Two-channel, 600W @ 4Ω Power Amplifier with BLU link, 70V/100V / EN 54-16 Compliant for Life Safety Applications

รหัสสินค้า : CROWN-DCi2/600N

ราคา

145,600.00 บาท

จำนวนที่จะซื้อ
ราคารวม 145,600.00 บาท

สินค้าไม่เพียงพอ

สินค้าหมด

The DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology. This amplifier is EN 54-16 Compliant for life safety applications.

Features

  • ANALOG & DIGITAL INPUTS – With digital audio transport via HARMAN’s proprietary BLU-Link, plus balanced analog inputs, DCi gives you a tremendous audio advantage – at a much lower cost. The priority input router allows you to specify a primary input, and if audio is lost the amp automatically switches to the other input.
  • NETWORK MONITORING & CONTROL – Better monitoring, control and audio manipulation with the HiQnet™ protocol that’s over standard TCP/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.
  • PROGRAMMABLE GENERAL PURPOSE INPUT/OUTPUT PORTS – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.
  • DIGITAL SIGNAL PROCESSING – DSP capabilities include the following:
  • LevelMAX Limiters
  • Input/Output EQ
  • Crossover
  • Delay
  • Matrix Mixer
  • Speaker Line Monitoring
  • EN 54-16 Compliant for Life Safety Applications - Part 16 of the European Union’s (EU) EN 54 standard for fire detection and alarm systems has a specific requirement for voice alarms, which output messages in the form of a voice message rather than a traditional siren. This amplifier is certified as part of an EN 54-16 VACIE*, meeting the stringent requirements of a life safety system to serve the needs of hospitality, large venue and other markets.

Output Power: Dual Mode - All Channels Driven

DCi Network Model Channels 16Ω 70Vrms 100Vrms
2|300N 2 150W 300W 300W 150W 300W 300W
4|300N 4 150W 300W 300W 150W 300W 300W
8|300N 8 150W 300W 300W 150W 300W 300W
2|600N 2 300W 600W 600W 300W 600W 600W
4|600N 4 300W 600W 600W 300W 600W 600W
8|600N 8 300W 600W 600W 300W 600W 600W
2|1250N 2 1250W 1250W 1250W 625W 1250W 1250W
4|1250N 4 1250W 1250W 1250W 625W 1250W 1250W
2|2400N 2 2100W 2400W 1900W 950W 2100W 2300W
4|2400N 4 2100W 2400W 1900W 950W 2100W 2300W

Minimum Guaranteed Power (20Hz - 20kHz)

 

Output Power: Bridge Mono Mode - All Channels Driven

DCi Network Model 16Ω 140Vrms 200Vrms
2|300N 300W 600W 600W 600W 600W
4|300N 300W 600W 600W 600W 600W
8|300N 300W 600W 600W 600W 600W
2|600N 600W 1200W 1200W 1200W 1200W
4|600N 600W 1200W 1200W 1200W 1200W
8|600N 600W 1200W 1200W 1200W 1200W
2|1250N 2500W 2500W 2500W 2500W 2500W
4|1250N 2500W 2500W 2500W 2500W 2500W
2|2400N 4200W 4800W 3800W 4200W 4600W
4|2400N 4200W 4800W 3800W 4200W 4600W

Minimum Guaranteed Power (20Hz - 20kHz)

Output Channels 2
Frequency Response (8Ω, 20Hz - 20kHz) ±0.25dB
Total Harmonic Distortion (at full rated power, 20Hz - 20kHz) 0.35%
Damping Factor (20Hz to 100Hz) >1000
Load Impedance (Stereo/Dual Mode) 2Ω - 16Ω; 70Vrms and 100Vrms
Load Impedance Bridge Mono 4Ω - 16Ω; 140Vrms and 200Vrms
Cooling Continuously variable speed forced air, front to back airflow
Maximum Fan Noise (re dBA SPL @ 1M) 45
Required AC Mains (±10%) 100V-240V ~ 50/60Hz
Power Connector 15A IEC
Dimensions (W x H x D) 483 mm x 89 mm x 362 mm
19 in x 3.5 in x 14.25 in
Weight 8.53 kg (18.8 lbs)
Visitors: 536,990